« Other products in this product category

EV14-1150-L11 | This product is a package, see below for availability Sold in sets flow matched by us. Compatible with standard, race fuels and E85 / RE85. This product contains multiple items.

EV14 Injector, 12 Ohm, 1150 cc, C15, Nippon Denso (ND, Sumitomo), O-O 61 mm, Long, 11 mm Top Adapter with Filter, Bottom 16 mm Seal (EV14-1150-L11)

  • Maximum flow approx 1150cc @ 3 bar
  • Long type injector (O-ring distance is 61 mm) replaces long injector
  • Compatible with E85/RE85 and gasoline
  • O rings compatible with ethanol and gasoline
  • On top, adapter with filter and 11 mm O ring
  • At bottom 16 mm Japan type seal
  • Nippon Denso (ND) type connector
  • High resistance
  • Modified, new Bosch EV14-injector, "ball to seat" type tip
  • Conical type spray
  • Delivered in sets flow matched by us
The total flow is between 1130 - 1200 cc/ min @ 3 bar depending on the set. Nominal flow rates: 1140 cc @ 3 bar, 1330 cc @ 4 bar, 1450 cc @ 5 bar
  74.06 € 91.84 € VAT 24%
  $ 81.47
 

This product contains the following items

Connector adapter lead, Nippon Denso to Bosch EV1(Jetronic/ AMP)

Connector adapter lead, Nippon Denso to Bosch EV1(Jetronic/ AMP)
Product number:
ND-JET
  10.33 € 12.81 € VAT 24%
  $ 11.36
 
This product contains multiple single items. Please click for more information.

Connector adapter Nippon Denso (ND, injector) --> USCAR (harness

Connector adapter Nippon Denso (ND, injector) --> USCAR (harness
In our own stock 298 pc(s)
Product number:
ND-USCAR-2
  2.42 € 3.00 € VAT 24%
  $ 2.66
 
Orders received before 10 AM (our local time) will mainly be shipped the same working day.

Connector adapter lead, Nippon Denso (injector) to USCAR (harness side) ND-USCAR

Connector adapter lead, Nippon Denso (injector) to USCAR (harness side) ND-USCAR
Product number:
ND-USCAR
  10.11 € 12.54 € VAT 24%
  $ 11.12
 
This product contains multiple single items. Please click for more information.

Bottom seal for Japanese cars, can be used with EV14 injectors

Bottom seal for Japanese cars, can be used with EV14 injectors
In our own stock 249 pc(s)
Product number:
SEAL-INJ-5
  0.98 € 1.21 € VAT 24%
  $ 1.07
 
In our own stock. Sold by piece.

Viton O ring 7.4X2.16mm. For Japanese injectors and TOP11 adapte

Viton O ring 7.4X2.16mm. For Japanese injectors and TOP11 adapte
In our own stock 805 pc(s)
Product number:
SEAL-INJ-2
  0.81 € 1.00 € VAT 24%
  $ 0.89
 
In our own stock. Sold by piece.

2 pole Nippon Denso type connector set. For injectors and sensor

2 pole Nippon Denso type connector set. For injectors and sensor
Product number:
ND-CON-1-SET
  3.40 € 4.22 € VAT 24%
  $ 3.74
 
This product contains multiple single items. Please click for more information.